310s Stainless Steel Strip

310S Stainless Steel Strip

Quality Stainless Steel Strip Grade:
ASTM 310S
JIS SUS310S
EN 1.4845

310S Stainless Steel Strip Specifications

Grade: 310S
Standard: ASTM/EN/JIS
Thickness: 0.03mm-3.0 mm
Width: 1.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge

310S Stainless Steel Strip Introductions

310S stainless steel strip is austenitic chromium-nickel stainless steel with good oxidation resistance and resistance, corrosion and high temperature resistance.
Because of the higher percentage of chromium and nickel, it has much better strength, can work continuously at high temperature, and has good high temperature resistance.
It also has good oxidation resistance, corrosion resistance, acid and alkali resistance, and high temperature resistance.
310S stainless steel strips are specially used to manufacture electric furnace tubes. The austenitic stainless steel adds carbon content, the strength is improved due to its solid solution strengthening effect.
Therefore, it has high strength at high temperature. The melting point is 1470℃, and it starts to soften at 800℃, and the allowable stress continues to decrease.

310S Stainless Steel Strip Applications

310S stainless steel strip is widely used in petroleum, chemical, medical, food, light industry, mechanical instruments, etc.

310S Stainless Steel Strip Chemical Composition

The chemical components of grade 310S stainless steel strip is summarized in the following table:

Grade	Standard	C	Si	Mn	P	S	Cr	Ni	Mo
310S	ASTM A240	≤0.08	≤1.500	≤2.00	≤0.035	≤0.030	24.00-26.00	19.00-22.00	–

310S Stainless Steel Mother Coil Mechanical Property

Below The Table Is For Your Reference:

Grade	Standard	Yield Strength Rp0.2 (N/mm²)	Tensile Strength Rm (N/mm²)	Elongation %	Hardness (HV)	Hardness (HRB)
201	ASTM A240	≥ 275	≥ 520	≥ 35	≤ 260	≤ 101
202	ASTM A240	≥ 275	≥ 520	≥ 40	≤ 218	≤ 95
301	ASTM A240	≥ 205	≥ 520	≥ 40	≤ 200	≤ 90
304	ASTM A240	≥ 205	≥ 515	≥ 40	≤ 210	≤ 92
304L	ASTM A240	≥ 205	≥ 520	≥ 40	≤ 200	≤ 90
316L	ASTM A240	≥ 177	≥ 480	≥ 40	≤ 200	≤ 90
316Ti	ASTM A240	≥ 205	≥ 520	≥ 40	≤ 200	≤ 90
317L	ASTM A240	≥ 205	≥ 515	≥ 40	≤ 218	≤ 95
309S	ASTM A240	≥ 205	≥ 515	≥ 40	≤ 218	≤ 95
310S	ASTM A240	≥ 205	≥ 520	≥ 40	≤ 200	≤ 90
321	ASTM A240	≥ 205	≥ 520	≥ 40	≤ 200	≤ 90
347	ASTM A240	≥ 205	≥ 520	≥ 35	≤ 200	≤ 90
410S	ASTM A240	≥ 205	≥ 440	≥ 20	≤ 210	≤ 92
420J2	ASTM A240	≥ 225	≥ 540	≥ 18	≤ 180	≤ 80
430	ASTM A240	≥ 206	≥ 450	≥ 22	≤ 200	≤ 88
2205	ASTM A240	≥ 450	≥ 620	≥ 25	≤ 293	≤ 30
2507	ASTM A240	≥ 450	≥ 620	≥ 25	≤ 290	≤ 30
253 MA®	ASTM	≥ 310	≥ 600	≥ 40	≤ 217	≤ 95
254 SMO®	ASTM	≥ 300	≥ 650	≥ 35	≤ 223	≤ 96
654 SMO®	ASTM	≥ 430	≥ 750	≥ 40	≤ 250	≤ 100
904L	ASTM	≥ 216	≥ 490	≥ 35	–	≤ 90
UNS N08926	ASTM	≥ 295	≥ 650	≥ 35	–	≤ 100
UNS S17400	ASTM	≥ 725	≥ 930	≥ 10	–	–

310S Stainless Steel Strip Production Tolerance