304 stainless steel strips are used in cylinder gaskets and rings

Why 304 Stainless Steel Strips Are Used In Cylinder Gaskets And Rings?

The cylinder gaskets and rings are mostly used in automobile combustion engines. Grade 304 stainless steel strips are used for making cylinder gaskets and rings.

These are primarily used between the cylinder head and cylinder block.

The stainless steel strip’s cylinder gasket and rings are mostly used to prevent the leakage of high-pressure gases during combustion.

Due to the temperature of an automobile engine is very high during working. The working efficiency of 304 stainless steel strips is outstanding at high-temperature conditions.

The 304 stainless steel strips have a good oxidation resistance up to 870°C, in continuous service, up to 925°C.

The 304 stainless steel strips have excellent corrosion-resistant properties. Therefore these strips are primarily used in cylinder gaskets.

Let’s keep reading.

Gaskets and rings are usually made of 304 stainless steel strips and used in automotive engines.

A cylinder head and a cylinder block make up an automotive engine.

A cylinder head gasket is placed between the head and the block to stop leaks of the high-pressure combustion gas inside the engine.

The majority of gaskets up to the 1990s were made of asbestos. However, 304 stainless steel strips have been used in recent years due to their excellent performance and durability.

Stainless steel strips with a small layer of rubber coated on the surface have become quite popular in preventing internal fluid leakage.

The 304 stainless steel gasket is placed between the cylinder head and block before being carefully secured from both sides with bolts during engine construction.

Therefore, the beading foot of the gasket experiences a high local tensile stress. The head is pushed up while the engine is running, creating gap between the head and the block of the engine cylinder.

What are 304 stainless steel cylinder gaskets and rings?

The 304 is the austenitic grade of stainless steel that may sustain very deep drawings.

Due to this characteristic, 304 stainless steel is the most common grade used in applications like cylinder gaskets and rings.

Grade 304 stainless steel strips have an 18% chromium and 8% nickel nominal composition.

To establish a static seal, cylinders or connecting flanges are sealed with stainless steel gaskets. This will continue to maintain the leak-proof seal under all operating circumstances.

Metastable austenitic stainless steel strips with high strength and good formability are used for gaskets and rings.

304 stainless steel strips are typically cold-rolled into sheets about 0.2 mm thickness, and the mechanical properties are subsequently adjusted.

What are the advantages of using 304 stainless steel strips in cylinder gaskets and rings application?

When exposed to different corrosive media and conditions, stainless steel 304 exhibits remarkable corrosion resistance.

Grade 304 stainless steel strips are the most common type used stainless steel strips worldwide.

Durability is the key advantage of 304 stainless steel. It is simple to maintain and allows for easy manufacturing and cleaning.

Because 304 stainless steel is resilient and resists oxidation and corrosion, it can withstand normal exposures.

Its melting point ranges from 2,550° F to 2,650° F, making it capable of withstanding extremely high temperatures. For this reason, it is mostly employed in cylinder gaskets for automobile engines.

Also, 304 stainless steel is valued as having a high tensile strength of roughly 621 MPa (90 ksi).

The higher operating temperature of 304 stainless steel is up to 870 °C. The performance and procedure of hot and cold forming in stainless steel 304 are outstanding.

Why the edge burr and flatness of 304 stainless steel strips are so important in cylinder gaskets and rings production?

After the 304 stainless steel strips slitting process, deburring and flatness are necessary.

The sharp edges and burrs are very harmful to both workers and machines.

The fabrication of 304 stainless steel gaskets and rings is one industry where deburring metals are frequently ignored.

Deburring should be prioritized since burrs can affect the production of cylinder gaskets and rings.

Because you might not be able to see or feel a burr, you might miss it.

It is essential to finish deburring and flatten the materials as flatly as possible because burrs and flatness can affect other measurements.

How to produce one roll grade 304 stainless steel strip for cylinder gaskets and rings?

We must use the 304 stainless steel strip production process to create one roll of strips for cylinder gaskets and rings.

The first step in this process is receiving and inspecting the stainless steel coils raw materials through quality assurance.

By using roller mills, this raw material is next subjected to rolling and annealing processes.

Following these steps, the steel strips’ surfaces are cleaned and degreased.

The stainless steel strips used to create the cylinder gaskets and rings bend and gradually stretch as they pass through a row of slightly slanted rollers, maintaining their straightness.

Following the required thickness and width, these strips were slit to readily meet the specifications for cylinder gaskets and rings.

How we deal with your 304 stainless steel cylinder gaskets and rings project?

We have expertise in manufacturing many products with all grades of stainless steel strips.

We especially have lot of experience in making cylinder gaskets and rings 304 stainless steel strips.

Our quality management system provides you with brief information about your project.

Conclusion

There are many reasons behind the popularity of 304 stainless steel strips like excellent corrosion resistance, strength, durability, weldability, and outstanding performance at high temperatures.

These properties make the 304 stainless steel strips are the best choice for cylinder gaskets and rings production.

When in doubt, always seek the help from an expert. HZW is the leading stainless steel strips manufacturer in China, our team has tremendous experience in the stainless steel strip manufacturing industry and is always here to help you with your needs.

Request A Quote