Alloys Wiki
UNE
Aluminum alloy is a type of metallic substance that primarily consists of the alloy aluminum and may also contain other chemical contents like: cuivre, magnésium, manganèse, silicium, or zinc. The specific composition and relative proportions of these elements determine the particular type of alloy. The normal grades are 1050, 1060, 1070, 1350, 3003, etc.
Classe 1060 aluminium alloy is an aluminium-based alloy in the “commercially pure” wrought family (1000 or 1xxx series).
B
Base copper describes the copper layer on the raw circuit board base material in the delivery state. This forms the starting point for later copper structures. It is common, for example, to start with standard 35um with a base copper of 18um. The missing 17um are built up by through-plating and amplification. Base copper thicknesses of 18um, 35um, and 50um are common for rigid circuit boards. For thick copper boards, even higher base copper is sometimes used. For flexible printed circuit boards, 12um, 18um, and 35um are common.
C
Unlike pure copper, copper alloys are complex formulations of metal with a copper base and alloy elements such as nickel, aluminium, silicium, tin, and zinc in varying concentrations that give the alloy desired properties.
Grade C1100 pure copper is universal for electrical industries and has a minimum conductivity rating of 100% IACS and is required to be 99.90% pure.
Grade C1100 copper foil strip is made by rolling copper to a very thin thickness (entre 0.0015mm et 0.3mm) puis laminage à froid ou à chaud selon l'épaisseur souhaitée. Ceci peut être suivi d'un recuit (pour encore plus de flexibilité) et ensuite transformées en bandes ou feuilles stratifiées avec des matériaux d'isolation.
Grade C1100 pure copper foils are used in dry-type transformers and small transformers, où ils sont enroulés avec des matériaux isolants.
ré
Stainless steel density signifies the mass of the substance within a given unit of volume.
Cette propriété est une caractéristique de l’acier inoxydable, avec sa densité se situant généralement entre 7.6 g/cm³ et 8.0 g/cm³.
L'acier inoxydable est un matériau largement utilisé composé d'un minimum de 10.5% Chrome, avec d'autres éléments qui se combinent pour créer sa structure distincte.
Ces composants comprennent du carbone, Silicium, Manganèse, Phosphore, Soufre, Nickel, Molybdène, Titane et Cuivre. Cet acier est reconnu pour sa solidité exceptionnelle et sa remarquable résistance à la corrosion..
Les variations dans les compositions chimiques et leurs proportions déterminent les densités distinctes des différentes qualités d'acier inoxydable..
Parmi les nuances d'acier inoxydable, 304 et 316L sont les matériaux les plus couramment utilisés avec des densités différentes.
Par conséquent, le calcul du poids de l'acier inoxydable diffère entre 304 et 316 Bonne résistance à la corrosion.
L'aluminium et ses alliages ont de faibles densités; Donc, il est le plus largement utilisé dans l’industrie aéronautique. En raison de ses propriétés uniques, l'aluminium est utilisé dans une large gamme d'applications. La densité de l'aluminium est 2.71 g/cm3 ou 2710 kg/m3, et c'est 1/3 of the stainless steel.
En raison de la différence de densité, L'alliage d'aluminium est plus léger que l'acier inoxydable mais n'est pas loin en termes de résistance..
DIN is the German industry standard.
E
A mechanical property of metal that is the degree to which a material may be bent, stretched, or compressed before it ruptures. It is a point between tensile strength and yield strength and is expressed as a percentage of the original length.
F
Flexural strength is a term used in statics.
g
GH4169 alloy is a nickel-based superalloy extensively used in the aircraft engine industrybecause of its excellent mechanical properties and good fabrication ability.
The GH4169 alloy could provide operational conditions up to a maximum useful service temperature of about 650 °C to meet the requirements of the rotor components. Par exemple, a high tensile strength, fracture toughness, oxidation resistance and excellent stress rupture resistance are attained.
H
Hastelloy is a nickel-based corrosion-resistant alloy, mainly divided into the nickel-chromium alloy and nickel-chromium molybdenum alloy two categories.
Hastelloy has good corrosion resistance and thermal stability and is used in the aviation industry and chemical field. Hastelloy plates are suitable for use in a variety of chemical industries containing oxidizing and reducing media.
Application areas, la bande d'acier inoxydable 654SMO® de qualité est largement utilisée pour les applications ci-dessous, bellows compensators, la bande d'acier inoxydable 654SMO® de qualité est largement utilisée pour les applications ci-dessous, flue gas desulfurization and denitrification, paper industry, aerospace applications, acidic environment.
Hastelloy C-276 (NOUS N10276 / W.Nr. 2.4819) est un alliage nickel-chrome-molybdène très couramment utilisé. Parmi les superalliages, il est connu pour sa forte teneur en molybdène.
D'abord, comme élément résistant à la corrosion, le molybdène apporte à l'alliage une très haute résistance à la corrosion réductrice. En combinant avec le nickel et le chrome, L'Hastelloy C-276 présente une très bonne résistance globale à la corrosion.. Par rapport à l'acier inoxydable, son excellente résistance à la fissuration par corrosion sous contrainte dans les solutions contenant du chlorure ne peut être remplacée.
en deuxième, l'effet de renforcement de la solution solide des éléments de molybdène et de tungstène est très évident, et ils apportent une très grande résistance à l'alliage Hastelloy C-276. Comme les autres alliages de nickel, L'Hastelloy C-276 a une bonne ductilité. Il est facile à façonner et à souder.
L'alliage Hastelloy C-276 est bien adapté à l'arc de fusion de gaz (GMA/ME), arc gazeux au tungstène (GTA/TIG) et arc métallique blindé (SMA/bâton) procédés de soudage. L'Hastelloy C-276 est idéal pour les applications marines. Sa résistance à la corrosion le rend résistant pendant longtemps à diverses substances corrosives présentes dans l’eau de mer qui coule.. toutefois, L'Hastelloy C-276 présente également de bonnes performances globales à haute température. Il est très approprié pour l'équipement de préparation de divers produits chimiques corrosifs ou le réacteur de diverses substances acides.
HASTELLOY® C-22® alloy (UNS N06022) est l'un des matériaux nickel-chrome-molybdène bien connus et éprouvés, dont les principales caractéristiques sont la résistance aux produits chimiques oxydants et non oxydants, et protection contre les piqûres, attaque de crevasse, et fissuration par corrosion sous contrainte.
Sa haute teneur en chrome lui confère une bien meilleure résistance aux milieux oxydants que le standard de la famille, Alliage C-276, et confère une résistance exceptionnelle aux piqûres induites par le chlorure, une forme d’attaque insidieuse et imprévisible, à laquelle les aciers inoxydables sont sujets.
Comme les autres alliages de nickel, HASTELLOY® C-22® alloy is very ductile, présente une excellente soudabilité, et est facilement transformé en composants industriels. Il est disponible sous forme de plaques, des draps, bandes, billets, barres, fils, tuyaux, tubes, et électrodes enrobées. Industrie de transformation chimique typique (IPC) les applications incluent les réacteurs, la bande d'acier inoxydable 654SMO® de qualité est largement utilisée pour les applications ci-dessous, et colonnes.
Alloy hardness is a characteristic that determines the surface wear and abrasive resistance. The ability of a material to resist denting from impact is related to hardness as well as a material’s ductility.
En général, different materials differ in their hardness; for example hard metals such as titanium and beryllium are harder than soft metals such as sodium and metallic tin, or wood and common plastics.
I
Alliages Inconel are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat.
When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack.
Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications.
Common trade names for Inconel alloys include: Inconel 625, Inconel 718, Inconel X-750.
Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.
They are mostly nickel-based, and designed for excellent corrosion resistance as well as strength at high temperatures.
J
Japanese Industrial Standards (JIS) are the standards used for industrial activities in Japan, coordinated by the Japanese Industrial Standards Committee (JISC) and published by the Japanese Standards Association (JSA). The JISC is composed of many nationwide committees and plays a vital role in standardizing activities across Japan.
K
L
M
Monel is a group of nickel alloys, primarily composed of nickel (jusqu'à 67%) et cuivre, with small amounts of iron, manganèse, carbone, et silicium.
Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.
Monel was created by Robert Crooks Stanley, who worked for the International Nickel Company (INCO) dans 1901. Alliage de monel 400 is a binary alloy of the same proportions of nickel and copper as is found naturally in the nickel ore from the Sudbury (Ontario) mines and is therefore considered a puritan alloy. Monel was named after company president Ambrose Monel, and patented in 1906. One L was dropped, because family names were not allowed as trademarks at that time. The name is now a trademark of Special Metals Corporation.
It is a very expensive alloy, with cost ranging from 5 à 10 times the cost of copper and nickel, hence its use is limited to those applications where it cannot be replaced with cheaper alternatives. Compared to carbon steel, piping in Monel is more than 3 times as expensive.
N
The term nickel alloy refers to a metal that has nickel as one of its primary elements. There are many different nickel alloys, and new ones are being created or developed all the time.
Some types of nickel alloys are referred to as superalloys because of their superior oxidation and creep resistance, allowing them to be used at temperatures of more than half their melting points.
O
The outer diameter (DE) of a hollow circular pipe is the measurement of the outside edges of the pipe passing through its center. The outer diameter of a pipe, together with its wall thickness, are essential to inside diameter calculations.
P
Pickling is the process used to remove weld heat tinted layers from the surface of stainless steel fabrications.
Q
In materials science, quenching is the rapid cooling of a workpiece in water, gaz, huile, polymer, air, or other fluids to obtain certain material properties.
A type of heat treating, quenching prevents undesired low-temperature processes, such as phase transformations, from occurring.
It does this by reducing the window of time during which these undesired reactions are both thermodynamically favorable and kinetically accessible; par exemple, quenching can reduce the crystal grain size of both metallic and plastic materials, increasing their hardness.
R
S
Acier inoxydable, also known as Inox, acier résistant à la corrosion (CRES) et acier inoxydable, est un alliage de fer résistant à la rouille et à la corrosion. It contains at least 10.5% chromium and usually nickel, and may also contain other elements, such as carbon, to obtain the desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
The alloy’s properties, such as luster and resistance to corrosion, are useful in many applications. Stainless steel can be rolled into sheets, assiettes, barres, wire, and tubing. These can be used in cookware, cutlery, Instruments chirurgicaux, major appliances, vehicles, construction material in large buildings, industrial equipment (par exemple., in paper mills, chemical plants, traitement de l'eau), and storage tanks and tankers for chemicals and food products.
Different types of stainless steel are labeled with an AISI three-digit number. The ISO 15510 standard lists the chemical compositions of stainless steels of the specifications in existing ISO, ASTHME, AU, JIS, and GB standards in a useful interchange table.
T
Titanium alloys are alloys that contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even at extreme temperatures).
They are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures.
toutefois, the high cost of both raw materials and processing limit their use to military applications, avion, spacecraft, Vélos, Équipement médical, bijoux, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics.
Although “commercially pure” titanium has acceptable mechanical properties and has been used for orthopedic and dental implants, for most applications titanium is alloyed with small amounts of aluminium and vanadium, typically 6% et 4% respectivement, by weight. This mixture has a solid solubility which varies dramatically with temperature, allowing it to undergo precipitation strengthening. This heat treatment process is carried out after the alloy has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high-strength product.
U
V
Dureté Vickers, a measure of the hardness of a material, calculated from the size of an impression produced under load by a pyramid-shaped diamond indenter.
Devised in the 1920s by engineers at Vickers, Ltd., in the United Kingdom, the diamond pyramid hardness test, as it also became known, permitted the establishment of a continuous scale of comparable numbers that accurately reflected the wide range of hardnesses found in steels.
X
Grade X22CrMoV12-1 stainless steel is also called 1.4923 Bonne résistance à la corrosion.
Grade X22CrMoV12-1 stainless steel is a combination of chromium, molibdenium, vanadium, nickel elements.
Due to the addition of vanadium it has an increased creep rupture strength. Scale oxide resistance up to approximately 600°C. The corrosion resistance in natural environment is limited due to the relatively low chromium content.
Grade X22CrMoV12-1 stainless steel is widely used in turbine construction, aerospace and for pressure and steam boiler.
Y
Yield strength is defined as the maximum stress material will tolerate before plastic deformation begins.
The term “yield strength” is typically used in the context of ductile materials, or materials that can deform.
Z
irconium alloys are solid solutions of zirconium or other metals, a common subgroup having the trade mark Zircaloy.
Zirconium has very low absorption cross-section of thermal neutrons, haute dureté, ductility and corrosion resistance. One of the main uses of zirconium alloys is in nuclear technology, as cladding of fuel rods in nuclear reactors, especially water reactors.
A typical composition of nuclear-grade zirconium alloys is more than 95 weight percent zirconium and less than 2% of tin, niobium, le fer, Le standard de l'inox duplex, nickel and other metals, which are added to improve mechanical properties and corrosion resistance.
