what is inconel 600 strip

What Is Inconel 600 Strip?

Inconel 600 strip is a nickel-chromium alloy strip designed for use from cryogenic to elevated temperatures in the range of 2000 deg F(1093 deg C).

It is non magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures.

What Are The Characteristics Of Inconel 600 Strip?

Alloy 600 strip is also known as UNS N06600 alloy strip.

The main characteristics about Inconel 600 strip are:

Heat resistance: Inconel 600 strip has excellent resistance to oxidation at high temperatures. It can withstand up to 2200°F (1204°C) before being affected by corrosion. This property makes it suitable for use in extreme environments such as those found in aircraft engines and hot water pipes.

Corrosion resistance: Inconel 600 strip has excellent corrosion resistance when exposed to seawater, steam or other substances that contain chlorides or sulfates. This property makes it ideal for use in marine environments where it may come into contact with saltwater during its lifetime. It is also suitable for applications where there will be exposure to chloride-containing coolants such as sodium chloride or potassium chloride.

Strength: The strength of Inconel 600 strip is similar to that of steel but it weighs less than 20 times less than steel per unit area so it can be used in applications where weight matters such as aircraft engines or satellites.

What Are The Chemical Compositions Of Inconel 600 Strip?

Inconel 600 Alloy Strip Chemical Composition(%)
Ni + CoCrFeCMnSSiCu
72.0 min14.0-17.06.0-10.00.15 max1.00 max0.015 max0.50 max0.50 max

INCONEL® is a registered trademark of the Special Metals Corporation group of companies.

What Are The Mechanical Properties Of Inconel 600 Strip?

The mechanical properties of Inconel 600 alloy strips are displayed in the following table:
Product FormConditionTensile (ksi).2% Yield (ksi)Elongation (%)Hardness (HRB)
StripCold-Rolled80-10030-4535-5588 Max

In What Applications Is Inconel 600 Strip Used?

Inconel 600 strip is a versatile alloy that can be used in a wide range of applications.

It has high strength and good corrosion resistance.

The following are some of the applications where Inconel 600 strip is used:

  1. Heat exchangers and condensers
  2. Heat shields
  3. Welding electrodes
  4. Boilers and pressure vessels
  5. Chemical equipment components
  6. Heat exchangers
  7. High-temperature process equipment
  8. Heat treat furnaces
  9. Explosive atmospheres
  10. Aircraft engine components
  11. Spacecraft rocket engines

How To Produce One Roll Inconel 600 Strip?

Casting: Inconel 600 alloy melts can absorb a large amount of gas and undergo strong oxidation. Generally, induction furnace is used for smelting, the surface of the melt is covered with glass, and charcoal, manganese, silicon, magnesium, titanium, etc. are used for deoxidation. The melting temperature is between 1450 and 1560 °C, which varies with the alloy. Usually flat ingots are cast in pig iron molds (see cast iron mold ingots) or semi-continuous casting (see semi-continuous ingot casting). Ingot weight in the range of 30kg to 400kg. Defects such as inclusions and cold partitions on the surface of the ingot should be cleaned up.

Hot rolling: Inconel 600 alloys have good high-temperature plasticity and high deformation resistance. If a gas stove is used, the sulfur content of the gas must be strictly controlled to avoid hot brittleness. A nickel ingot weighing 400kg and having a thickness of 200mm was hot rolled to a thickness of 10mm through 11 passes. Sometimes it is forged before hot rolling to improve the internal structure.

Pickling: Inconel 600 alloys are easy to stick to the tool when milling surfaces (see milling of non-ferrous alloy ingots), so pickling is commonly used for hot-rolled slabs to remove surface oxides. Pickling uses a mixed acid of sulfuric acid and nitric acid, or nitric acid alone. In order to improve the effect of pickling, cold rolling is performed with a small reduction before pickling, so that the oxide layer whose extension is smaller than the matrix is ​​broken, so as to facilitate the reaction with acid.

Cold rolling: Hot rolled Inconel 600 alloy billets with a thickness of 5.0 to 13.5 mm need to undergo repeated cold rolling and annealing to reach the finished product thickness. The reduction ratio between two anneals can reach 70% to 85%. Four-high rolling mills are commonly used in cold rolling. High-strength nickel alloy strips are finish rolled in 12-high or 20-high mills. During cold rolling, it should be fully lubricated and cooled to prevent sticking to the roll and affecting the surface quality.

Annealing: Annealing is divided into intermediate annealing and finish annealing. The purpose of intermediate annealing is to eliminate work hardening caused by cold rolling; finish annealing is to control finished product properties. The temperature for complete annealing of Inconel 600 alloy is between 570 and 850 IC, depending on alloy composition and product thickness. The coiled strip is easy to bond when annealed, so it should be re-rolled before annealing. Because the oxide scale of nickel alloys is difficult to remove, bell-type vacuum furnaces are often used for annealing. Nickel-aluminum, nickel-titanium and other complex nickel alloys can be precipitation hardened by solution/aging treatment to increase strength.

Tempering: The purpose of tempering is to restore hardness in order to improve impact strength, tensile strength (tensile strength) and fatigue resistance (fatigue strength) of alloy strips after annealing treatment.

Strip straightening: Straightening ensures that the product has high dimensional accuracy and flatness with no deformation such as bends or kinks in it. This step can be done either manually or mechanically using a straightener machine or press brake arrangement with automatic measurement system to ensure dimensional accuracy of the strip being processed.

Slitting Process: For different thickness of Inconel 600 strip slitting process, the small and large slitting machines will be used by our team. Our larger slitting machines can cut hot rolled mother coils from mill origin directly. Thickness is from 2mm to 6mm.

And meantime we use the small machines to cut the narrow strip coils as precision strips. Thickness is from 0.02mm to 3.0mm.

Our workers will make adjustments between coils and cutting tools when they are preparing to slit in order to minimize the burr of strips edge as much as possible.

Packaging Process: To a certain extent, exquisite standard sea packaging reflects one supplier‘s service. It greatly influences the client’s next purchasing plans.

One kind of packaging is called wooden pallet. And the fumigation wooden pallets and non-fumigation pallets are two kinds of pallets type.

Eye to eye or eye to wall types of packaging alloy strips will be adopted before shipment.

The surface finish of metal strips will be packaged with waterproof paper. Then coating the PVC film on this paper.

After that, the banding strap will be used for fastening pallets and strips products.

Before placing the metal strips into the wooden case, the strips are packaged with perfect packaging.

Wooden case and four corners shall not be smaller than the outer diameter of the total strips.

In addition, clear labels are tagged on the outside of these sea standard packages for easy identification of these nickel alloy strips specifications and quality information.

How To Choose The Right Inconel 600 Strip Supplier From China?

You can find plenty of suppliers of China to supply you with the best quality Inconel 600 strips products. But it is not an easy task to find out who is the best supplier. You need to do some research, comparisons and analysis among different suppliers to find out a reliable and trustworthy supplier.

There are many ways to identify the right supplier. You can take reference from your colleagues and friends who have already taken their services. You may also consult with experts from this field for good advice.

There are also many websites available online which provide detailed information about Inconel 600 strip suppliers, their contact details, service charges, location, etc. You may visit these sites for more information on various suppliers in China.

When you are looking for a good Inconel 600 strip supplier from China market, there are certain qualities you should look for. Some of these include:

  • Has been in the business a long time.
  • Is known as a reputable company.
  • Produces high quality products.
  • Offers competitive pricing and excellent customer service.

There are many suppliers in China who claim to be able to provide all of these things, but the reality is that many will not and cannot meet your expectations. If you are looking to purchase Inconel 600 strips and other products from China, it is important that you choose a reliable and trustworthy supplier who can offer you everything that you need at an affordable price.

Conclusion

Inconel 600 strip is an excellent choice for those looking to gain some tensile strength with a little bit less flexibility than the other options available.

It has low amounts of nickel and chromium overall, leading it to have great corrosion resistance ratings and high levels of thermal stability.

Inconel 600 strip is not easy to purchase, but there are ways to overcome this challenge depending on your needs as a manufacturer.

Contact us today to learn more about Inconel 600 strip and all our strips solutions.

Request A Quote