Transformer 1050 O Aluminium Foils Strips For Transformers Winding

Your Premier Transformer 1050 O Aluminium Foils Strips For Transformers Winding Manufacturer

transformer 1050 o aluminium foils strips for transformers winding

Transformer 1050 O Aluminium Foils Strips For Transformers Winding

Transformer 1050 O aluminium foils strips for transformers winding, also called 1050 aluminum transformer strips foils, which are mainly used in the dry type and oil-immersed transformers winding.

The 1050 aluminium foils strips for transformers range from 0.2 mm to 3.5 mm thickness and 10 mm to 1600 mm width.

With high conductivity, good corrosion resistance and beautiful appearance, 1050 aluminum foils strips for transformers are essential materials in the process of producing transformers.

Whatever size at whatever tight tolerance of 1050 foils strips you demand, HZW here is sure to have it!

Specifications of 1050 O Aluminium Foils Strips For Transformers Winding

1.Quick Details of 1050 O Aluminium Foils Strips

Product NameTransformer 1050 O aluminium foils strips for transformers winding
Grades1050
TemperO
Thickness0.2mm-3.5mm
WidthWidth:10mm-1600mm
EdgeSlit/Round
Quantity Tolerance±10%
Paper Core Internal
Diameter
Ø 150mm,Ø300mm, Ø400mm, Ø500mm paper core, special internal diameter core and without paper core on
special request
Surface FinishThe strip has a smooth surface, free from scratches and impurities
Electrical ConductivityTransformer windings made of 1050 O in annealed condition is guaranteed to be better than 60 % ACS.
ApplicationsTransformer winding
PackagingWooden Pallet/Wooden Case
Payment Terms30% TT deposit and 70% balance before shipment, 100% LC at sight
Delivery Time7-10 working days
MOQ5 Tons
Shipping PortShanghai/Ningbo port
SampleThe sample of aluminium foil strip is available
RemarkAluminium foil strip can be customized

2.Executive Standard

1050 O Aluminium Foils Strips For Transformers Winding
AlloyTemper(annealed)Thickness(mm)Tensile Strength
Tensile Strength(Mpa)Elongation(%)
>0.2~4.0 25
Thickness Tolerance(mm)
Thickness(mmTolerance(mm)
>0.20~0.40±0.02
>0.40~0.80±0.03
>0.80~1.10±0.04
>1.10~1.40±0.05
>1.40~2.00±0.06
>2.00~2.50±0.07
>2.50~3.00±0.08
Width Tolerance(mm)
Width(mm)Thickness(mm)
1.0>1.0~1.5>1.5~2.5
Width Tolerance(±)
1000.10.20.25
>100~3000.150.250.3
>300~6000.30.40.5
>600~10000.60.7

3.Chemical Composition of 1050 O Aluminium Foils Strips

1050 O Aluminum Foils Strips Chemical Composition(%)
ElementAlSiFeMgZnMnTiCuV
Standard Value≥99.50.04310.2030.00130.00930.01040.020.00220.0039
aluminium foils strips for transformers winding production process

How Transformer 1050 O Aluminium Foils Strips Made?

The 1050 O aluminum foil for transformer winding is made of high-quality aluminum material, which has the characteristics of high conductivity, soft texture, smooth surface, no burrs and no waves.

The fineness of 1050 aluminum foil can be controlled at 0.2 mm or less, and the alloy composition and temper can be adjusted according to customer requirements.

The thickness tolerance is ±0.02 mm, the width tolerance is ±0.1mm, the diagonal difference is less than 1mm and the surface quality is good.

Transformer 1050 O Aluminium Foils Strips For Transformers Winding Edges Options

Many people have the trouble of transformer 1050 aluminum foils strips edge.

In the actual operation process, due to the influence of steel strip hardness and unloading speed, it is difficult to effectively control the edge of the transformer aluminum foil strip.

However, after our technical personnel have studied for a long time, we have found a solution to this problem.

The solution is: in order to make the edge of aluminum foil uniform, it is necessary to reduce the rolling pressure as much as possible and improve the surface quality of steel strip (for surface defect repair and removal).

This requires that in addition to adjusting the equipment parameters in strict accordance with the requirements of process technical conditions, but also according to different casting billets (casting thickness), different rolling mills and rolling mills (working roll sets) and different batches of materials.

The corresponding design and adjustment should be carried out for relevant process parameters.

aluminium foils strips for transformers winding edges

Transformer 1050 O Aluminium Foils Strips For Transformers Winding: The Ultimate Guide

In order to avoid the problems that might be caused by inferior or faulty 1050 O aluminium foils strips for transformers winding, consumers are encouraged to only buy from reputable merchants.

There are several different brands of 1050 O aluminium foil that are offered for sale on the market.

This makes it easier for buyers to find exactly what they want in comparison to other similar items.

If you are the beginner of this field, here is the right place you go.

What are 1050 O aluminium foils strips for transformers winding?

1050 O aluminium foils strips for transformers winding is widely used in the production of transformers.

With the continuous development of power industry, the requirements for transformer are also getting higher and higher.

The development of large volume and low loss transformer will promote the continuous improvement of product performance and quality, thereby promoting the continuous improvement of supporting materials.

In recent years, in order to meet the needs of global’s large-scale distribution transformers, large-capacity power transformers, ultra-high voltage power transmission and transformation projects, World’s transformer manufacturers have successively developed high-quality 1050 O aluminium foils strips for transformers winding with a thickness of 0.08 mm or less and a width of 10 mm or less through several technological reforms.

At present, most China domestic strip manufacturers produce 0.25mm thick aluminum foil strip coil with a width of 1250mm and a thickness tolerance below +/-5μm.

Common transformer winding problems

Transformers are often one of the most common elements we find in electrical equipment. They are used to transfer electrical power, typically to increase or decrease the voltage.

However, they can also be susceptible to several problems, which can lead to their degradation or even failure. These winding problems require maintenance and repair work, which usually involves a costly process and downtime.

Common transformer winding problems:

One of the most common types of winding problem is the formation of shorts between turns. This kind of short is found at different locations in a transformer winding, caused by imperfection during the manufacturing process, improper storage and handling, or excessive mechanical stress.

Shorts between turns may happen over the entire length of a coil end or along its length. They can be classified according to their location as either hot-spot shorts (between adjacent layers) or cold-spot shorts (between adjacent turns).

Another type of winding problem is insulation faults caused by partial discharges that occur in a transformer’s winding insulation system. They occur when part of the insulation breaks down under electric stress. In turn, it produces ionization channels that trigger localized current pulses that dissipate energy and produce gases inside the transformer’s winding system.

Why does transformer use 1050 O aluminum foil strip?

The 1050 O aluminum foil strip is a common material in the transformer winding, but why is it used?

  1. The chemical composition of 1050 O aluminum foil strip is Al99.5%, which has high conductivity and low price, and has become an indispensable material for power transformers.
  2. The transformer 1050 aluminum foil can be used not only for low voltage dry type transformers, but also for oil immersed transformers and high voltage transformers.
  3. The electrical conductivity of the 1050 O aluminium foil strip is up to 61.0-63.0%, which meets the national standard and can meet the requirements of transformers winding under different voltages and frequencies.

What are the advantages of using 1050 O aluminium foils strips for transformers winding?

The main advantages of 1050 O aluminum foil strip for transformer winding are as follows:

  • The surface quality of the foil is high and the conductivity is good
  • After annealing, the elongation of the foil can reach 1% or more
  • The shape of the foil is good, the thickness tolerance is small, the width tolerance is ± 0.2mm, and the thickness control can be controlled below ± 5 microns
  • The annealed foil has good plasticity and can be stretched into a cylindrical shape without cracks during winding

How to deal with 1050 O aluminium foils strips for transformers winding packaging?

The packaging for transformer 1050 aluminum foils strips is mainly about wooden pallet and wooden box.

1050 aluminum foil length of each roll should be same, packaging mark should have clear and complete information.

  • Wooden Pallet: Standard export package, no fumigation; Pallet size: 1.1m x 1.1m x 0.8m; Gross weight: 1 Ton; 4 pallets/20′ FCL; 8 pallets/40′ FCL Or as per customer’s requirements.
  • Wooden Box: The standard export package with fumigation certificate, it can avoid any potential damage during the transportation.

How to buy 1050 O aluminum foils strips for transformers from China manufacturers?

To buy 1050 O aluminium foils strips for transformers winding, the buyer should consider:

  1. The China manufacturer’s experience in the metal strips manufacturing industry.
  2. The quality of goods manufactured by the China manufacturers.
  3. The financial stability of the manufacturers.
  4. The supplier’s delivery system.

To get a quick quote for 1050 O aluminium foils strips you need to know:

  • Quantity (Kgs/Tons)
  • Size (Thickness x Width x Coil)
  • Temper (O Soft)
  • Material Grade (1050, etc)
  • Edge (Slit/Deburred/Round)
  • Coil ID (200mm/300mm/400mm/500mm)
  • Surface Finish (Sliver Aluminum Color)
  • Packaging (Eye to eye, eye to wall, wooden pallets, wooden cases)

Dry type transformer is a kind of transformer without oil immersion cooling method. It has a lot of advantages such as safety, reliability and environmental protection. So in recent years it has been widely used.

In addition to 1060 O aluminium foils for transformers winding, HZW can also produces 1070 aluminum strip for transformer winding and 1060 aluminum foil for transformer winding.

What is the hs code of 1050 aluminum foils strips for transformers?

To find out the detailed HS code of related aluminum strips, you need to determine the specifications and applications of the strips.

The following are the part of 1050 aluminum foils strips for transformers
HS code:76069100.00

Request A Quote